Tubing Connectors and Fittings
AVANTOR MASTERFLEX (VWR LLC) MF 1-1/2 X 1 PVDF BARB 6/PK
Masterflex Fitting, PVDF, Straight, Sanitary Clamp to Hose Barb Adapter, 1 1/2IN Tri-Clamp x 1 ID; 6/PK, Avantor
Cole-Parmer Hose Barb Fitting, Tee Union, Medical Nylon, Cleanroom Packed, 1/16" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 µm or larger per cubic foot.
Easily combine or split fluid flow using tee unions. A single barb on each end of the fitting creates a tight seal to keep the tubing in place. These medical nylon fittings are made from the same resin as natural nylon but with FDA-compliant white coloring. They offer good tensile strength, stiffness, and impact resistance and are resistant to fuels and lubricants. Not recommended for use with phenols, strong acids, and oxidizing agents.
AVANTOR MASTERFLEX (VWR LLC) ADAPTER 2IN CLAMP X 2IN NPT
Masterflex Fitting, Polypropylene, Straight, Sanitary Clamp to Thread, 2IN Clamp x 2IN NPT(M), Avantor
AVANTOR MASTERFLEX (VWR LLC) MF PP 1 1/2 X 3/8 TRI BRB 6/PK
Masterflex Fitting, Polypropylene, Straight, Sanitary Clamp to Hose Barb Adapter, 1 1/2IN Tri-Clamp x 3/8IN ID; 6/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Y L/S18/35/36 I/P73/70 10/PK
Masterflex Fitting, Polypropylene, Y-Connector, Hose Barb Union, 3/8IN ID; 10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) ELBOWS 1/8FTFT X 1/4FTFT 10/P
Masterflex Fitting, Natural Polypropylene, Elbow, Hosebarb to Thread, 1/4IN ID x 1/8IN NPT(M)10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) ELBOWS 1/4IN 100/PK
Masterflex Fitting, Natural Polypropylene, Elbow, Hose Barb Union, 1/4IN ID; 100/PK, Avantor
Chemglass Life Sciences Adapter, Syringe Addition, 24/40 Joint Size, 105mm Height
Adapter, Syringe Addition, 24/40 Joint Size, 105mm Height. Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa.
TA Instruments Stainless Steel, 20 mm, 1 deg Cone, NST, HR X0
Waters TA Instruments HR X0 Stainless Steel Upper Cone (20 mm, 1 deg, NST) is for use with lower Peltier plate. Smart Swap 2 geometry for use with HR X0 instruments only.
Ace Glass, Inc. Stopcock adapter, 14/20 outer top, 14/20 inner bottom, 2mmglass plug
Stopcock adapter, 14/20 outer top, 14/20 inner bottom, 2mmglass plug
Ace Glass, Inc. Head, 6in, four neck, 45/50 center, (2)24/40, 10/30
6 inch reaction head with a flat ground flange for use with all reaction flasks that have a 150mm (6 inch) Duran ground mating flange. Head has four necks: (1) 45/50 center, (2) 24/40 sides, (1) 10/30 side.